Wheel brushes crimped for power drills, universal, shank-mounted

POS wheel brush crimped RBU dia. 100 mm shank dia. 6 mm universal RED filament dia. 1.27 grit 80 power drills

Item number:: 43740150
EAN:: 4007220353417

POS wheel brush crimped RBU dia. 100 mm shank dia. 6 mm universal RED filament dia. 1.27 grit 80 power drills 2

Technical data

Technical information

POS wheel brush crimped RBU dia. 100 mm shank dia. 6 mm universal RED filament dia. 1.27 grit 80 power drills

Dia. external: 100 mm
Dia. filament material: 1.27 mm
Dia. shank: 6 mm
Filament material: Plastic filament, coarse (RED)
Grit size: 80
Max. RPM: 4500 RPM
Mounting system: Shank
Packaging: POS packaging
Width: 10 mm
Packaging unit: 1 piece

Description

Generally suitable for cleaning, derusting, smoothing, cleaning of weld seams, light deburring, and removal of corrosion and paint. Specially developed for use with low rotational speeds on cordless drills and power drills.

Brushes with plastic filament are particularly well suited to deburring work and surface improvement.

Plastic filament withstands temperatures up to 220 °C.

Advantages

Highly flexible, enabling optimal adjustment to the workpiece contour.
Optimum presentation on the PFERDTOOL-CENTER using hanging hole and labelling with EAN number, designation and filament material.
Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip.

Recommendations for use

Please observe the recommended rotational speeds.
For the best results, use a tool drive with a minimum output of 300 watts.
Use coolant for applications where large amounts of heat are produced.

Safety notes

When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This applies in particular for use in the high rotational speed range. The minimum clamping length is 10 mm.

Materials that can be worked: Aluminium; Brass; Bronze; Cast iron; Cast steel; Copper; Other non-ferrous metals; Stainless steel (INOX); Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Thermosetting plastics; Wood

Applications: Cleaning; Deburring; Paint stripping; Roughening; Structuring (matt finishing, brush matting and satin finishing)

Drive types: Flexible shaft drive; Power drill

Downloads

Wheel brushes crimped for power drills, universal, shank-mounted

POS wheel brush crimped RBU dia. 100 mm shank dia. 6 mm universal RED filament dia. 1.27 grit 80 power drills

Thank you for your message. We'll contact you as soon as possible.

An error occurred - please try again later

PFERD Newsletter subscription