Tungsten carbide burrs for general use, cut 3 PLUS HC-FEP, ball shape KUD

Tungsten carbide burr ball KUD dia. 10x09mm shank dia. 6mm Z3P universal medium cross cut HICOAT

KUD 1009/6 Z3 PLUS HC-FEP

Item number:: 21112724
EAN:: 4007220835593

Tungsten carbide burr ball KUD dia. 10x09mm shank dia. 6mm Z3P universal medium cross cut HICOAT 1

Tungsten carbide burr ball KUD dia. 10x09mm shank dia. 6mm Z3P universal medium cross cut HICOAT 2

Tungsten carbide burr ball KUD dia. 10x09mm shank dia. 6mm Z3P universal medium cross cut HICOAT 3

Technical data

Technical information

Tungsten carbide burr ball KUD dia. 10x09mm shank dia. 6mm Z3P universal medium cross cut HICOAT

Cut: 3 PLUS HC-FEP
Dia. external: 10 mm
Dia. shank: 6 mm
Length, cut: 9 mm
Length, total: 49 mm
RPM, grey cast iron, white cast iron: 18000 - 24000 RPM
RPM, hardened, heat-treated steels over 1,200 N/mm²: 8000 - 14000 RPM
RPM, high-temperature-resistant materials: 19000 RPM
RPM, rust and acid-resistant steels: 14000 RPM
RPM, steels up to 1,200 N/mm²: 14000 - 24000 RPM
Packaging unit: 1 piece

Description

Cut 3 PLUS with HICOAT coating HC-FEP is characterized by its high hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.

Ball-shaped burr according to DIN 8032 with cut conforming to DIN 8033.

Special features

The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.

Materials that can be worked: Annealed cast iron; Brass; Bronze; Case-hardened steels; Cast steel; Hard aluminium alloys; Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Steel; Steel, cast steel; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Tool steels

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams

Drive types: Automated centres; Drive spindle; Flexible shaft drive; Straight grinder; Tool machine

PFERD TOOLS VALUE

PFERD TOOLS EFFICIENCY

recommends burrs with the HICOAT coating for working for long periods with low levels of fatigue, whilst saving resources and achieving perfect results as quickly as possible.

Downloads

Tungsten carbide burrs for general use, cut 3 PLUS HC-FEP, ball shape KUD

Tungsten carbide burr ball KUD dia. 10x09mm shank dia. 6mm Z3P universal medium cross cut HICOAT

KUD 1009/6 Z3 PLUS HC-FEP

PFERD TOOLS EFFICIENCY

PFERD TOOLS Newsletter subscription