Tungsten carbide burr set NEW COMBI CUT, MX NCC

Tungsten carbide burr set NCC 5-piece dia. 6mm shank dia. 6mm MX all materials

Item number:: 21900502
EAN:: 4007220935705

Tungsten carbide burr set NCC 5-piece dia. 6mm shank dia. 6mm MX all materials 2

Tungsten carbide burr set NCC 5-piece dia. 6mm shank dia. 6mm MX all materials 3

Tungsten carbide burr set NCC 5-piece dia. 6mm shank dia. 6mm MX all materials 4

Technical data Change variant

This set contains

Tungsten carbide burr NCC cylindrical ZYA dia. 06x16 mm shank dia. 6 mm MX all materials

Item number: 21301612

EAN: 4007220609149
Tungsten carbide burr NCC ball KUD dia. 06x05 mm shank dia. 6 mm MX all materials

Item number: 21312512

EAN: 4007220609286
Tungsten carbide burr NCC cylindrical with radius end WRC dia. 06x16 mm shank dia. 6 mm MX all materials

Item number: 21305012

EAN: 4007220609224
Tungsten carbide burr NCC pointed tree SPG dia. 06x18 mm shank dia. 6 mm MX all materials

Item number: 21322512

EAN: 4007220609422
Tungsten carbide burr NCC tree shape with radius end RBF dia. 06x18 mm shank dia. 6 mm MX all materials

Item number: 21317312

EAN: 4007220609361

Technical information

Tungsten carbide burr set NCC 5-piece dia. 6mm shank dia. 6mm MX all materials

Cut: MX NCC
Dia. shank: 6 mm
PFERD type: 6/5-6 MX NCC
Packaging unit: 1 piece

Description

NEW PFERD-COMBICUT tungsten carbide burrs with the cut MX NCC were designed especially for general use. They have a good stock removal rate when used on various different materials.

The 6/5-6 MX NCC set contains the five most common shapes with a burr diameter of 6 mm in the general MX NCC cut. The robust round plastic box with screw-on top protects the tools from dirt and damage.

Advantages

Good stock removal rate and tool life.
Cost-effective stock removal when used on a wide variety of materials.
The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

Use the highest rotational speeds possible. In this respect, please observe our recommended rotational speeds/cutting speeds.
The contact area between the burr and the workpiece must not exceed 30 % of the total burr surface.

Materials that can be worked: Bronze; Case-hardened steels; Cast iron; Cast steel; Cobalt-based alloys; Fibre-reinforced thermosetting plastics (GRP, CRP); Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 %; Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content ≤ 40 %; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hard aluminium alloys; Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Hard non-ferrous metal; Hardwood; High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Other; Other non-ferrous metals; Plastics; Stainless steel (INOX); Steel; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Thermoplastics; Titanium; Titanium alloys; Tool steels; White annealed cast iron (GTW, GJMW); Wood

Applications: Cutting out holes; Deburring; Milling; Working on edges; Work on weld seams

Drive types: Flexible shaft drive; Robot; Straight grinder

Downloads

Tungsten carbide burr set NEW COMBI CUT, MX NCC

Tungsten carbide burr set NCC 5-piece dia. 6mm shank dia. 6mm MX all materials

This set contains

Thank you for your message. We'll contact you as soon as possible.

An error occurred - please try again later

PFERD Newsletter subscription