Tungsten carbide burr set for high performance, cut ALLROUND

Tungsten carbide high-performance burr set 1412 ALLROUND 5-piece dia. 12 mm shank dia. 6 mm universal coarse

Item number:: 21901412
EAN:: 4007220133576

Tungsten carbide high-performance burr set 1412 ALLROUND 5-piece dia. 12 mm shank dia. 6 mm universal coarse 2

Tungsten carbide high-performance burr set 1412 ALLROUND 5-piece dia. 12 mm shank dia. 6 mm universal coarse 3

Tungsten carbide high-performance burr set 1412 ALLROUND 5-piece dia. 12 mm shank dia. 6 mm universal coarse Youtube

Technical data Change variant

This set contains

Tungsten carbide high-performance burr ALLROUND cylindrical ZYAS end dia. 12x25mm shank dia. 6mm universal coarse

Item number: 21001003

EAN: 4007220092941
Tungsten carbide high-performance burr ALLROUND cylindrical with radius end WRC dia. 12x25mm shank dia. 6mm universal coarse

Item number: 21001013

EAN: 4007220093221

Technical information

Tungsten carbide high-performance burr set 1412 ALLROUND 5-piece dia. 12 mm shank dia. 6 mm universal coarse

Cut: ALLROUND
Dia. shank: 6 mm
PFERD type: 1412 ALLROUND
Packaging unit: 1 piece

Description

The 1412 ALLROUND set contains five versatile tungsten carbide burrs for use on important materials such as steel and cast steel, stainless steel (INOX), non-ferrous metals and cast iron in the most common shapes and dimensions. The sturdy plastic box protects the tools from dirt and damage. The burrs are secured at the shanks, facilitating the selection and withdrawal of the tools. Five further slots are available for other burrs.

Advantages

Significantly better stock removal rate than burrs with a conventional cross cut.
Saves time and money thanks to its very high stock removal rate on key materials.
Comfortable working thanks to reduced vibration and less noise.
The highly accurate concentricity enables impactfree working without creating chatter marks and the drive is subject to less wear.

Recommendations for use

To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible.
Observe the recommended rotational speeds.

Safety notes

The very high stock removal rate can cause discolouration on the shank. This does not constitute a safety risk.

Materials that can be worked: Annealed cast iron; Black annealed cast iron (GTS, GJMB); Brass; Bronze; Case-hardened steels; Cast iron; Cast steel; Copper; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hard aluminium alloys; Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Hard non-ferrous metal; Stainless steel (INOX); Steel; Steel, cast steel; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Titanium; Titanium alloys; Tool steels; White annealed cast iron (GTW, GJMW); Zinc

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams

Drive types: Drive spindle; Flexible shaft drive; Robot; Stationary machines; Straight grinder; Tool machine

PFERDVALUE

PFERDEFFICIENCY

recommends burrs with the ALLROUND cut for working for long periods with low levels of fatigue, whilst saving resources and achieving perfect results as quickly as possible.