Overlap slotted disc

Overlap slotted disc KS dia. 50x5 mm thread 1/4-28 UNF A 80 for grinding narrow slots

Technical data

Technical information

Overlap slotted disc KS dia. 50x5 mm thread 1/4-28 UNF A 80 for grinding narrow slots

Description

Special tool for side grinding in grooves, fillets and slots. They are mounted via a central threaded hub.

Advantages

Hard-to-reach areas can be accessed as the tool provides abrasive action on its top and bottom sides.
High economic efficiency as tool can be changed quickly.

Recommendations for use

Ordering notes

Safety notes

The maximum permitted peripheral speed is 20 m/s.
For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.

Materials that can be worked: Aluminium; Annealed cast iron; Brass; Cast steel; Copper; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC)

Applications: Deburring; Leveling; Step-by-step fine grinding; Structuring (matt finishing, brush matting and satin finishing); Surface work; Work on weld seams