Cup brushes knotted, universal, shank-mounted

POS cup brush knotted TBG dia. 65 mm shank dia. 6 mm steel wire dia. 0.50

Item number:: 43740160
EAN:: 4007220402184

POS cup brush knotted TBG dia. 65 mm shank dia. 6 mm steel wire dia. 0.50 2

Technical data

Technical information

POS cup brush knotted TBG dia. 65 mm shank dia. 6 mm steel wire dia. 0.50

Dia. external: 65 mm
Dia. filament material: 0.5 mm
Dia. shank: 6 mm
Filament material: Steel wire (ST)
Length, filament: 20 mm
Max. RPM: 12500 RPM
Mounting system: Shank
Packaging: POS packaging
RPM, optimum, from: 6300 RPM
RPM, optimum, to: 12500 RPM
Packaging unit: 1 piece

Description

Aggressive brush. Excellent for heavy-duty brushing such as deburring, cleaning and derusting on large surfaces.

Steel wire is the most common filament material. Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring. PFERD special wire has high tensile strength and bending fatigue strength. This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications.

Steel wire withstands temperatures up to 300 Â°C.

Advantages

Aggressive brushing effect due to the very stiff wire knots.
Optimum presentation on the PFERDTOOL-CENTER using hanging hole and labelling with EAN number, designation and filament material.
Long tool life through use of PFERD special wire.

Recommendations for use

Please observe the recommended rotational speeds.
For the best results, use a tool drive with a minimum output of 500 watts.

Safety notes

When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This applies in particular for use in the high rotational speed range. The minimum clamping length is 10 mm.

Materials that can be worked: Cast iron; Cast steel; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC)

Applications: Cleaning; Deburring; Derusting; Descaling; Paint stripping; Removing oxide layers; Root seam processing

Drive types: Flexible shaft drive; Power drill; Straight grinder

Downloads

Cup brushes knotted, universal, shank-mounted

POS cup brush knotted TBG dia. 65 mm shank dia. 6 mm steel wire dia. 0.50

Thank you for your message. We'll contact you as soon as possible.

An error occurred - please try again later

PFERD Newsletter subscription