wheel brush slim crimped RBU dia. 200x16xvariable hole ceramic filament dia. 1.10mm grit 120

Technical information

Description

Brushes with ceramic oxide grain (CO) offer good toughness and excellent sharpness. For high stock removal values and aggressive brushing behaviour.

Plastic filament withstands temperatures up to 220 °C.

Excellent for medium-duty hand-held or automated brushing of workpieces with large surfaces.

Special features

The special design enables bunching to create wide gapless rollers. This enables a uniform surface finish to be achieved.
Highly flexible, enabling optimal adjustment to the workpiece contour.
Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip.
Can be used with all commercially available stationary drive systems and bench grinders thanks to the variable hole diameter.

Recommendations for use

Ordering notes

Materials that can be worked: Aluminium; Bronze; Cast iron; Cast steel; Cobalt-based alloys; Hard non-ferrous metal; High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Nickel or titanium-based superalloys; Other non-ferrous metals; Soft titanium alloys (tensile strength 500 N/mm²); Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Titanium; Titanium alloys

Applications: Cleaning; Deburring; Structuring (matt finishing, brush matting and satin finishing)

Drive types: Automated centres; Bench grinder; Drive spindle; Flexible shaft drive; Straight grinder

Downloads

Wheel brushes crimped slim, with hole