Tungsten carbide burr NCC tree shape with radius end KEL dia. 16x35 mm shank dia. 6 mm MX all materials

Technical information

Angle: 14 °
Cut: MX NCC
Dia. external: 16 mm
Dia. shank: 6 mm
Length, cut: 35 mm
Length, total: 75 mm
Radius corner design: 4.3 mm
Packaging unit: 1 piece

Description

NEW PFERD-COMBICUT tungsten carbide burrs with the cut MX NCC were designed especially for general use. They have a good stock removal rate when used on various different materials.

Conical burr with round radius end according to DIN 8032.

Advantages

Good stock removal rate and tool life.
Cost-effective stock removal when used on a wide variety of materials.
The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

Use the highest rotational speeds possible. In this respect, please observe our recommended rotational speeds/cutting speeds.
The contact area between the burr and the workpiece must not exceed 30 % of the total burr surface.
If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.

Materials that can be worked: Aluminium; Annealed cast iron; Black annealed cast iron (GTS, GJMB); Brass; Bronze; Case-hardened steels; Cast iron; Cast steel; Cobalt-based alloys; Fibre-reinforced thermosetting plastics (GRP, CRP); Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 %; Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content ≤ 40 %; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hard aluminium alloys; Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Hard non-ferrous metal; Hardwood; High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Other; Other non-ferrous metals; Plastics; Stainless steel (INOX); Steel; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Thermoplastics; Titanium; Titanium alloys; Tool steels; White annealed cast iron (GTW, GJMW); Wood

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Working on edges; Work on weld seams

Drive types: Flexible shaft drive; Robot; Straight grinder

Downloads

Tungsten carbide burrs NEW COMBI CUT, MX NCC, conical shape with radius end KEL

Tungsten carbide burr NCC tree shape with radius end KEL dia. 16x35 mm shank dia. 6 mm MX all materials

Thank you for your message. We'll contact you as soon as possible.

An error occurred - please try again later

PFERD Newsletter subscription