POLINOX non-woven unmounted grinding wheel PNL dia. 100x50 mm thread M14 A100 for fine grinding and finishing

Technical information

POLINOX non-woven unmounted grinding wheel PNL dia. 100x50 mm thread M14 A100 for fine grinding and finishing

Abrasive: Aluminium oxide A
Dia. external: 100 mm
Dia. hole: 0 mm
Dia. thread: M14
Grit size: 100
Max. RPM: 6000 RPM
RPM, optimum: 3000 RPM
Width: 50 mm
Packaging unit: 1 piece

Description

POLINOX unmounted grinding wheels consist of non-woven polyamide abrasive, into which abrasive grain is integrated. The non-woven abrasive flaps are arranged radially. A long tool life is achieved through the dense packing of the flaps.

The tool is designed for working on medium-sized surfaces with speed-adjustable angle grinders and fillet weld grinders, and can be mounted directly onto the drive system's spindle without the need for additional clamping devices.

Advantages

Highly flexible, enabling optimal adjustment to the contour.
Cool grinding and low thermal load on the workpiece.
The open structure and high flexibility of the non-woven material prevents tool clogging.

Recommendations for use

For the best results, use at a recommended cutting speed of 10-20 m/s. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.

Safety notes

The maximum permitted peripheral speed is 32 m/s.

Materials that can be worked: Aluminium; Brass; Bronze; Cast steel; Cobalt-based alloys; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Titanium; Titanium alloys; Zinc

Applications: Cleaning; Deburring; Roughening; Step-by-step fine grinding; Structuring (matt finishing, brush matting and satin finishing); Surface work

Drive types: Angle grinder; Cordless angle grinder; Drive spindle

PFERDVALUE

PFERDERGONOMICS

recommends POLINOX unmounted grinding wheels to sustainably reduce the vibration and noise produced during use and to improve comfort when working.

Downloads

POLINOX wheels PNL

POLINOX non-woven unmounted grinding wheel PNL dia. 100x50 mm thread M14 A100 for fine grinding and finishing

PFERDERGONOMICS

Thank you for your message. We'll contact you as soon as possible.

An error occurred - please try again later

PFERD Newsletter subscription