POLINOX mounted grinding wheels PNG

POLINOX non-woven mounted grinding wheel PNG dia. 80x50 mm shank dia. 6 mm SIC180 for fine grinding and finishing

Item number:: 44640858
EAN:: 4007220738023

POLINOX non-woven mounted grinding wheel PNG dia. 80x50 mm shank dia. 6 mm SIC180 for fine grinding and finishing 2

POLINOX non-woven mounted grinding wheel PNG dia. 80x50 mm shank dia. 6 mm SIC180 for fine grinding and finishing Youtube

Technical data Change variant

Choose options

Abrasive

Aluminium oxide A Silicon carbide SiC/C

Dia. external

80 mm

Grit size

180

Width

50 mm

Reset Filter

Technical information

POLINOX non-woven mounted grinding wheel PNG dia. 80x50 mm shank dia. 6 mm SIC180 for fine grinding and finishing

Abrasive: Silicon carbide SiC/C
Dia. external: 80 mm
Dia. shank: 6 mm
Grit size: 180
Length, shank: 40
Max. RPM: 7500 RPM
RPM, optimum: 4000 RPM
Width: 50 mm
Packaging unit: 10 pieces

Description

POLINOX mounted grinding wheels consist of non-woven polyamide abrasive, into which abrasive grain is integrated. They are made of several very wavily arranged strips of non-woven abrasive material, wound around a core. The wavy structure of the non-woven abrasive material permits seamless brush matting of surfaces.

Advantages

Highly flexible, enabling optimal adjustment to the contour.
Cool grinding and low thermal load on the workpiece.
The open structure and high flexibility of the non-woven material prevents tool clogging.

Recommendations for use

For the best results, use at a recommended cutting speed of 10-20 m/s. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.

Safety notes

The maximum permitted peripheral speed is 32 m/s.
For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.

Materials that can be worked: Aluminium; Brass; Bronze; Cast steel; Cobalt-based alloys; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Titanium; Titanium alloys; Zinc

Applications: Cleaning; Deburring; Roughening; Step-by-step fine grinding; Structuring (matt finishing, brush matting and satin finishing); Surface work

Drive types: Drive spindle; Flexible shaft drive; Straight grinder

PFERDVALUE

PFERDERGONOMICS

recommends POLINOX mounted grinding wheels to sustainably reduce the vibration and noise produced during use and to improve comfort when working.

Downloads

POLINOX mounted grinding wheels PNG

POLINOX non-woven mounted grinding wheel PNG dia. 80x50 mm shank dia. 6 mm SIC180 for fine grinding and finishing

PFERDERGONOMICS

Thank you for your message. We'll contact you as soon as possible.

An error occurred - please try again later

PFERD Newsletter subscription