POLIVLIES flap discs PVL

POLIVLIES flap disc PVL aluminium oxide dia. 125 mm hole 22.23 mm A180M for fine grinding

Choose options

Dia. external

115 mm 125 mm

Dia. hole

22.23 mm

Grit size

100 G 180 M 240 F

Mounting system

Centre hole

Technical information

POLIVLIES flap disc PVL aluminium oxide dia. 125 mm hole 22.23 mm A180M for fine grinding

Description

For general coarse to fine grinding applications in industry and professional trades.

They are especially well-suited to work on large stainless steel (INOX) surfaces.

POLIVLIES grit size 180 M = medium (red-brown)

Advantages

High economic efficiency due to high abrasive performance and long tool life.
Creates a consistently high surface quality over the entire tool life, as new sharp abrasive is steadily released.
Highly flexible, enabling optimal adjustment to the contour.

Recommendations for use

Safety notes

For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.

Materials that can be worked: Aluminium; Brass; Bronze; Cast steel; Cobalt-based alloys; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Titanium; Titanium alloys; Zinc

Applications: Cleaning; Deburring; Roughening; Step-by-step fine grinding; Structuring (matt finishing, brush matting and satin finishing); Surface work; Work on weld seams

Downloads