POLINOX mounted grinding wheels PNR

POLINOX non-woven mounted grinding wheel PNR dia. 25x15 mm shank dia. 3 mm A180 for fine grinding and finishing

Item number:: 44650232
EAN:: 4007220034743

POLINOX non-woven mounted grinding wheel PNR dia. 25x15 mm shank dia. 3 mm A180 for fine grinding and finishing 2

POLINOX non-woven mounted grinding wheel PNR dia. 25x15 mm shank dia. 3 mm A180 for fine grinding and finishing Youtube

Technical data Change variant

Choose options

Abrasive

Aluminium oxide A

Dia. external

25 mm 80 mm

Dia. shank

3 mm 6 mm

Grit size

180

Reset Filter

Technical information

POLINOX non-woven mounted grinding wheel PNR dia. 25x15 mm shank dia. 3 mm A180 for fine grinding and finishing

Abrasive: Aluminium oxide A
Dia. external: 25 mm
Dia. shank: 3 mm
Grit size: 180
Length, shank: 40
Max. RPM: 12300 RPM
RPM, optimum: 7600 RPM
Width: 15 mm
Packaging unit: 1 piece

Description

POLINOX mounted grinding wheels consist of non-woven polyamide abrasive, into which abrasive grain is integrated. The non-woven abrasive material is arranged in multiple (axial) disc layers. Since the individual non-woven discs are not interconnected, the abrasive surface adapts easily to different workpiece contours, e.g. when working on profiles or pipes.

Advantages

Highly flexible, enabling optimal adjustment to the contour.
Cool grinding and low thermal load on the workpiece.
The open structure and high flexibility of the non-woven material prevents tool clogging.

Recommendations for use

For the best results, use at a recommended cutting speed of 10-20 m/s. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.

Safety notes

The maximum permitted peripheral speed is 32 m/s.
For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.

Materials that can be worked: Aluminium; Brass; Bronze; Cast steel; Cobalt-based alloys; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Titanium; Titanium alloys; Zinc

Applications: Cleaning; Deburring; Roughening; Step-by-step fine grinding; Structuring (matt finishing, brush matting and satin finishing); Surface work

Drive types: Drive spindle; Flexible shaft drive; Straight grinder

PFERDVALUE

PFERDERGONOMICS

recommends POLINOX mounted grinding wheels to sustainably reduce the vibration and noise produced during use and to improve comfort when working.

Downloads

POLINOX mounted grinding wheels PNR

POLINOX non-woven mounted grinding wheel PNR dia. 25x15 mm shank dia. 3 mm A180 for fine grinding and finishing

PFERDERGONOMICS

Thank you for your message. We'll contact you as soon as possible.

An error occurred - please try again later

PFERD Newsletter subscription