POLINOX discs PNER

POLINOX pressed non-woven disc PNER dia. 115 mm centre hole dia. 22.23 mm soft SIC fine for finishing

Item number:
44690732
EAN:
4007220824337

Login / Register
Choose options
Dia. external
Version
Technical information
POLINOX pressed non-woven disc PNER dia. 115 mm centre hole dia. 22.23 mm soft SIC fine for finishing

Abrasive
Silicon carbide SiC/C
Dia. external
115 mm
Dia. hole
22.23 mm
Grit size
fine
Max. RPM
10000 RPM
RPM, optimum
6000 RPM
Version
W (soft)
Width
13 mm
Packaging unit
1 piece
Description

POLINOX unitized discs are used for face-down grinding on speed-adjustable angle grinders. Especially well-suited to work on larger surfaces. The compressed, non-woven material is bonded to a glass-fabric base.

POLINOX unitized discs PNER consist of multiple heavily compressed, non-woven layers, which are bonded together by a special grain/resin system. The different combinations of compression, fibres, grain and the appropriate bond results in non-woven products that offer a very good surface finish, high stock removal rate and long tool life. These tools can be used for a wide range of work on surfaces, from relatively coarse grinding to preparing the surface for polishing.

Soft version with excellent adaptability. The durability, grinding performance and very high surface quality are maintained at the same time. Very well-suited to work on contours.

Advantages
  • High economic efficiency due to high abrasive performance and long tool life.
  • Produces very good surface quality.
  • Can be profiled as desired, enabling optimal adjustment to the contour.
Recommendations for use
  • Considerably reduce cutting speed for work on materials with poor heat-conducting properties, e.g. titanium and stainless steel.
  • For the best results, use at a recommended cutting speed of 15-30 m/s. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.
Safety notes
  • For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.
Materials that can be worked
Aluminium
Brass
Bronze
Cast steel
Cobalt-based alloys
Copper
Fibre-reinforced thermosetting plastics (GRP, CRP)
Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)
Nickel-based alloys (e.g. Inconell and Hastelloy)
Stainless steel (INOX)
Steel materials with a hardness > 54 HRC
Steels up to 1,200 N/mm² (< 38 HRC)
Thermoplastics
Titanium
Titanium alloys
Zinc
Applications
Cleaning
Deburring
Roughening
Step-by-step fine grinding
Structuring (matt finishing, brush matting and satin finishing)
Surface work
Drive types
Angle grinder
Cordless angle grinder
Drive spindle
PFERDVALUE

PFERDERGONOMICS

recommends POLINOX grinding discs to sustainably reduce the vibration and noise produced during use and to improve comfort when working.
product.aggregation.prv-ergo
product.aggregation.prv-ergo
product.aggregation.prv-ergo
product.aggregation.prv-ergo

Downloads

PFERD Newsletter subscription

Register here free of charge for our PFERD newsletter and receive all the latest news on products, services and promotions from the world of PFERD on a regular basis.